Free shield SVG

Shield with a ribbon banner SVG

Shield with a ribbon banner. The preview is the SVG file itself.

A solid shield with a curved banner across it, open inside its outline for a name or a date, and a folded tail at each end. One piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 78 mm (3.94 × 3.06 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	543 mm at this size
Narrowest part	2.2 mm at this size
Nodes	29 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,573 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.78 in (25 × 20 mm)	0.56 mm	138 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.56 in (51 × 40 mm)	1.1 mm	276 mm	30	Vinyl, card and thin sheet
3 × 2.33 in (76 × 59 mm)	1.7 mm	414 mm	12	Vinyl, card and thin sheet
4 × 3.11 in (102 × 79 mm)	2.2 mm	552 mm	6	Vinyl, card and thin sheet
6 × 4.67 in (152 × 119 mm)	3.4 mm	828 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.22 in (203 × 158 mm)	4.5 mm	1,103 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.34 in (305 × 237 mm)	6.7 mm	1,655 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shield SVG files

← Shield with a chevron and three stars All 15 shields Shield with crossed swords →