Free shield SVG

Seven-point star badge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Seven-point star badge, as a solid black shape
Seven-point star badge. The preview is the SVG file itself.

A seven-pointed star with a ball on each point and a ring cut at its centre, the shape of an old-west lawman’s star. Blank, for a name or a number.

What is in the file

Size100 × 98 mm (3.94 × 3.85 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length758 mm at this size
Narrowest part2.7 mm at this size
Nodes104 curve and line segments
SymmetryMirror
Also found as7 point star badge SVG

Measured from the file. PNG: 2,000 × 1,958 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.69 mm193 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.96 in (51 × 50 mm)1.4 mm385 mm25Vinyl, card and thin sheet
3 × 2.93 in (76 × 75 mm)2.1 mm578 mm9Vinyl, card and thin sheet
4 × 3.91 in (102 × 99 mm)2.7 mm770 mm4Vinyl, card and thin sheet
6 × 5.87 in (152 × 149 mm)4.1 mm1,155 mm2Any material, including 3 mm wood and acrylic
8 × 7.82 in (203 × 199 mm)5.5 mm1,540 mm1Any material, including 3 mm wood and acrylic
12 × 11.74 in (305 × 298 mm)8.2 mm2,310 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shield SVG files

← Badge outline with a double line All 15 shields Heater shield →