Free shield SVG

French shield with a double line SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

French shield with a double line, drawn as a line
French shield with a double line. The preview is the SVG file itself.

A square-shouldered shield with round lower corners and a small point at the base, drawn as a bold line with a fine line inside it. The shape with the most room for lettering.

What is in the file

Size77 × 100 mm (3.04 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length1,180 mm at this size
Narrowest part1.4 mm at this size
Nodes65 curve and line segments
SymmetryMirror
Also found asCrest SVG

Measured from the file. PNG: 1,562 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)0.36 mm300 mm120Too fine for most machines
1.54 × 2 in (39 × 51 mm)0.71 mm599 mm30Fine detail: vinyl and paper only, weed with care
2.32 × 3 in (59 × 76 mm)1.1 mm899 mm12Vinyl, card and thin sheet
3.09 × 4 in (78 × 102 mm)1.4 mm1,199 mm6Vinyl, card and thin sheet
4.63 × 6 in (118 × 152 mm)2.1 mm1,798 mm2Vinyl, card and thin sheet
6.18 × 8 in (157 × 203 mm)2.8 mm2,398 mm1Vinyl, card and thin sheet
9.26 × 12 in (235 × 305 mm)4.3 mm3,597 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shield SVG files

← Shield outline All 15 shields Swiss shield with a border →