Free shield SVG

Swiss shield with a border SVG

Swiss shield with a border, as a solid black shape
Swiss shield with a border. The preview is the SVG file itself.

A shield whose top rises to a point in the middle and at each corner, as a solid panel inside a bold border with a clear line between them. Four small ties keep it in one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size82 × 100 mm (3.24 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length838 mm at this size
Narrowest part3 mm at this size
Nodes38 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,662 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.82 × 1 in (21 × 25 mm)0.76 mm213 mm110Fine detail: vinyl and paper only, weed with care
1.65 × 2 in (42 × 51 mm)1.5 mm426 mm30Vinyl, card and thin sheet
2.47 × 3 in (63 × 76 mm)2.3 mm639 mm12Vinyl, card and thin sheet
3.3 × 4 in (84 × 102 mm)3 mm851 mm6Any material, including 3 mm wood and acrylic
4.94 × 6 in (126 × 152 mm)4.6 mm1,277 mm2Any material, including 3 mm wood and acrylic
6.59 × 8 in (167 × 203 mm)6.1 mm1,703 mm1Any material, including 3 mm wood and acrylic
9.89 × 12 in (251 × 305 mm)9.1 mm2,554 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shield SVG files

← French shield with a double line All 15 shields Kite shield →