Free scarecrow SVG

Scarecrow with a blank sign SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Scarecrow with a blank sign, as a solid black shape
Scarecrow with a blank sign. The preview is the SVG file itself.

A scarecrow on its pole with a wide blank board hanging from its arms on two ropes. The board is about 84 mm across at full size, ready for a welcome, a name or a date.

What is in the file

Size98 × 100 mm (3.84 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length755 mm at this size
Narrowest part1.9 mm at this size
Nodes193 curve and line segments

Measured from the file. PNG: 1,954 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.48 mm192 mm100Too fine for most machines
1.95 × 2 in (50 × 51 mm)0.97 mm384 mm25Fine detail: vinyl and paper only, weed with care
2.93 × 3 in (74 × 76 mm)1.4 mm575 mm9Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)1.9 mm767 mm4Vinyl, card and thin sheet
5.86 × 6 in (149 × 152 mm)2.9 mm1,151 mm2Vinyl, card and thin sheet
7.81 × 8 in (198 × 203 mm)3.9 mm1,534 mm1Any material, including 3 mm wood and acrylic
11.71 × 12 in (297 × 305 mm)5.8 mm2,301 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarecrow SVG files

← Cute scarecrow with a sunflower All 11 scarecrows Scarecrow outline →