Free scarecrow SVG

Pumpkin head scarecrow SVG

Pumpkin head scarecrow, as a solid black shape
Pumpkin head scarecrow. The preview is the SVG file itself.

A scarecrow with a carved pumpkin for a head: triangle eyes and nose, a grin with two teeth and a stalk on top, with its arms drooping from the crossbar. For Halloween as much as for harvest.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size92 × 100 mm (3.63 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length737 mm at this size
Narrowest part2.5 mm at this size
Nodes206 curve and line segments
Also found asHalloween scarecrow pumpkin SVG

Measured from the file. PNG: 1,850 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.64 mm187 mm100Fine detail: vinyl and paper only, weed with care
1.84 × 2 in (47 × 51 mm)1.3 mm374 mm25Vinyl, card and thin sheet
2.77 × 3 in (70 × 76 mm)1.9 mm562 mm12Vinyl, card and thin sheet
3.69 × 4 in (94 × 102 mm)2.5 mm749 mm6Vinyl, card and thin sheet
5.53 × 6 in (141 × 152 mm)3.8 mm1,123 mm2Any material, including 3 mm wood and acrylic
7.38 × 8 in (187 × 203 mm)5.1 mm1,498 mm1Any material, including 3 mm wood and acrylic
11.06 × 12 in (281 × 305 mm)7.6 mm2,246 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarecrow SVG files

← Scarecrow eyes, nose and mouth All 11 scarecrows Scarecrow monogram frame →