Free scarecrow SVG

Scarecrow eyes, nose and mouth SVG

Scarecrow eyes, nose and mouth, as a solid black shape
Scarecrow eyes, nose and mouth. The preview is the SVG file itself.

The face on its own as four loose pieces: two button eyes with their thread holes, a triangle nose and a long stitched mouth. Stick them on a pumpkin, a hay bale, a pot or a paper bag.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 53 mm (3.94 × 2.07 in), scales to any size
Pieces4 separate pieces
Outlines to cut8: 4 outer edges and 4 cut-outs
Cut length565 mm at this size
Narrowest part3.1 mm at this size
Nodes100 curve and line segments

Measured from the file. PNG: 2,000 × 1,090 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.53 in (25 × 13 mm)0.79 mm144 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.05 in (51 × 27 mm)1.6 mm287 mm45Vinyl, card and thin sheet
3 × 1.58 in (76 × 40 mm)2.4 mm431 mm18Vinyl, card and thin sheet
4 × 2.11 in (102 × 54 mm)3.1 mm574 mm10Any material, including 3 mm wood and acrylic
6 × 3.16 in (152 × 80 mm)4.7 mm861 mm3Any material, including 3 mm wood and acrylic
8 × 4.22 in (203 × 107 mm)6.3 mm1,148 mm2Any material, including 3 mm wood and acrylic
12 × 6.32 in (305 × 161 mm)9.4 mm1,722 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarecrow SVG files

← Scarecrow face with a stitched smile All 11 scarecrows Pumpkin head scarecrow →