Free scarecrow SVG

Scarecrow face with a stitched smile SVG

Scarecrow face with a stitched smile, as a solid black shape
Scarecrow face with a stitched smile. The preview is the SVG file itself.

A sack face under a floppy hat: button eyes, a triangle nose and a smile sewn with five stitches, with straw sticking out at both sides and round the neck. The hat has a band and a sewn patch.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 97 mm (3.94 × 3.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length982 mm at this size
Narrowest part2.1 mm at this size
Nodes231 curve and line segments

Measured from the file. PNG: 2,000 × 1,950 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.53 mm249 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.95 in (51 × 49 mm)1.1 mm499 mm25Vinyl, card and thin sheet
3 × 2.92 in (76 × 74 mm)1.6 mm748 mm9Vinyl, card and thin sheet
4 × 3.9 in (102 × 99 mm)2.1 mm998 mm4Vinyl, card and thin sheet
6 × 5.84 in (152 × 148 mm)3.2 mm1,497 mm2Any material, including 3 mm wood and acrylic
8 × 7.79 in (203 × 198 mm)4.3 mm1,995 mm1Any material, including 3 mm wood and acrylic
12 × 11.69 in (305 × 297 mm)6.4 mm2,993 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarecrow SVG files

← Scarecrow silhouette with two crows All 11 scarecrows Scarecrow eyes, nose and mouth →