Free scarecrow SVG

Layered scarecrow in five colours SVG

Layered scarecrow in five colours, in layered colours
Layered scarecrow in five colours. The preview is the SVG file itself.

Five colours to stack: a blue shirt and yellow straw as the base, a tan sack face, a brown hat, an orange band, nose and patch, and dark eyes and stitches. Build it up from the back.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size93 × 100 mm (3.65 × 3.94 in), scales to any size
Pieces12 separate pieces
Outlines to cut12 outlines
Cut length1,824 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes269 curve and line segments
Layers6: shirt, straw, face, hat, trim and stitches

Measured from the file. PNG: 1,862 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.93 × 1 in (24 × 25 mm)Over 1.5 mm463 mm100Vinyl, card and thin sheet
1.86 × 2 in (47 × 51 mm)Over 3 mm927 mm25Any material, including 3 mm wood and acrylic
2.78 × 3 in (71 × 76 mm)Over 4.6 mm1,390 mm12Any material, including 3 mm wood and acrylic
3.71 × 4 in (94 × 102 mm)Over 6.1 mm1,853 mm6Any material, including 3 mm wood and acrylic
5.57 × 6 in (141 × 152 mm)Over 9.1 mm2,780 mm2Any material, including 3 mm wood and acrylic
7.42 × 8 in (189 × 203 mm)Over 12 mm3,706 mm1Any material, including 3 mm wood and acrylic
11.14 × 12 in (283 × 305 mm)Over 18 mm5,560 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarecrow SVG files

← Scarecrow outline All 11 scarecrows Classic scarecrow on a pole →