Free scarecrow SVG

Scarecrow outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Scarecrow outline, drawn as a line
Scarecrow outline. The preview is the SVG file itself.

The scarecrow face as a line drawing: the floppy hat and band, button eyes that peep from under the brim, a triangle nose on a seam and a stitched smile from cheek to cheek. One joined piece.

What is in the file

Size100 × 97 mm (3.94 × 3.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut18: 1 outer edge and 17 cut-outs
Cut length1,551 mm at this size
Narrowest part1 mm at this size
Nodes435 curve and line segments

Measured from the file. PNG: 2,000 × 1,950 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.25 mm394 mm100Too fine for most machines
2 × 1.95 in (51 × 49 mm)0.51 mm788 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.92 in (76 × 74 mm)0.76 mm1,182 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.9 in (102 × 99 mm)1 mm1,576 mm4Vinyl, card and thin sheet
6 × 5.84 in (152 × 148 mm)1.5 mm2,364 mm2Vinyl, card and thin sheet
8 × 7.79 in (203 × 198 mm)2 mm3,152 mm1Vinyl, card and thin sheet
12 × 11.69 in (305 × 297 mm)3 mm4,727 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarecrow SVG files

← Scarecrow with a blank sign All 11 scarecrows Layered scarecrow in five colours →