Free Santa tray SVG

Santa tray plate for cookies SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa tray plate for cookies, as a solid black shape — Santa tray plate for cookies. The preview is the SVG file itself.

A round plate for the cookies: a ring with “Cookies for Santa” in script, three stars above and a cookie with a bite out of it below. Sized to sit inside the rim of a dinner plate or a round charger.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	10 separate pieces
Outlines to cut	27: 10 outer edges and 17 cut-outs
Cut length	1,335 mm at this size
Narrowest part	1.4 mm at this size
Nodes	438 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.36 mm	339 mm	100	Too fine for most machines
2 × 2 in (51 × 51 mm)	0.71 mm	678 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)	1.1 mm	1,017 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	1.4 mm	1,356 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	2.1 mm	2,035 mm	1	Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)	2.8 mm	2,713 mm	1	Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)	4.3 mm	4,069 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa tray SVG files

← Dear Santa tray with three spots All 8 Santa trays Santa tray coaster for milk →