Free Santa tray SVG

Santa tray set of three rings SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa tray set of three rings, as a solid black shape
Santa tray set of three rings. The preview is the SVG file itself.

Three small rings side by side with the words inside: Cookies for Santa, Milk for Santa and Carrots for the reindeer. For a tray you would rather mark with three plain circles than one large design.

What is in the file

Size100 × 32 mm (3.94 × 1.27 in), scales to any size
Pieces18 separate pieces
Outlines to cut58: 18 outer edges and 40 cut-outs
Cut length1,301 mm at this size
Narrowest part0.6 mm at this size
Nodes1,055 curve and line segments
Also found asCookies for Santa carrots for reindeer SVG

Measured from the file. PNG: 2,000 × 698 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.15 mm330 mm230Too fine for most machines
2 × 0.65 in (51 × 16 mm)0.3 mm661 mm70Too fine for most machines
3 × 0.97 in (76 × 25 mm)0.46 mm991 mm30Too fine for most machines
4 × 1.29 in (102 × 33 mm)0.61 mm1,322 mm16Fine detail: vinyl and paper only, weed with care
6 × 1.94 in (152 × 49 mm)0.91 mm1,983 mm5Fine detail: vinyl and paper only, weed with care
8 × 2.58 in (203 × 66 mm)1.2 mm2,644 mm4Vinyl, card and thin sheet
12 × 3.88 in (305 × 98 mm)1.8 mm3,965 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa tray SVG files

← Santa tray plate with stars All 8 Santa trays Dear Santa tray with three spots →