Free Santa tray SVG

Santa tray plate with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa tray plate with stars, as a solid black shape — Santa tray plate with stars. The preview is the SVG file itself.

The plainest plate: a ring with “For Santa” in large script between two rows of stars, and nothing drawn on it. The largest lettering of the set, so it can be cut smallest.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	15 separate pieces
Outlines to cut	20: 15 outer edges and 5 cut-outs
Cut length	1,292 mm at this size
Narrowest part	1.9 mm at this size
Nodes	359 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.48 mm	328 mm	100	Too fine for most machines
2 × 2 in (51 × 51 mm)	0.97 mm	656 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)	1.4 mm	985 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	1.9 mm	1,313 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	2.9 mm	1,969 mm	1	Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)	3.9 mm	2,625 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	5.8 mm	3,938 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa tray SVG files

← Santa tray plate for snacks All 8 Santa trays Santa tray set of three rings →