Free Santa tray SVG

Santa tray plate for snacks SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa tray plate for snacks, as a solid black shape — Santa tray plate for snacks. The preview is the SVG file itself.

A plate that does not say what is on it: a ring with “Snacks for Santa” in script, three stars, and a cookie, a glass and a carrot in a row. For mince pies, biscuits or whatever your house leaves out.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	28: 12 outer edges and 16 cut-outs
Cut length	1,421 mm at this size
Narrowest part	0.9 mm at this size
Nodes	449 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.23 mm	361 mm	100	Too fine for most machines
2 × 2 in (51 × 51 mm)	0.46 mm	722 mm	25	Too fine for most machines
3 × 3 in (76 × 76 mm)	0.69 mm	1,083 mm	9	Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)	0.91 mm	1,444 mm	4	Fine detail: vinyl and paper only, weed with care
6 × 6 in (152 × 152 mm)	1.4 mm	2,166 mm	1	Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)	1.8 mm	2,887 mm	1	Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)	2.7 mm	4,331 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa tray SVG files

← Santa tray plate for cookies and milk All 8 Santa trays Santa tray plate with stars →