Free Santa tray SVG

Santa tray plate for cookies and milk SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa tray plate for cookies and milk, as a solid black shape
Santa tray plate for cookies and milk. The preview is the SVG file itself.

One plate for both: a ring with “Cookies & Milk for Santa” in script, three stars above and a cookie beside a glass of milk below. For a family that leaves everything on a single plate.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces14 separate pieces
Outlines to cut38: 14 outer edges and 24 cut-outs
Cut length1,555 mm at this size
Narrowest part1.2 mm at this size
Nodes577 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.3 mm395 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.61 mm790 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.91 mm1,185 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1.2 mm1,580 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.8 mm2,370 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2.4 mm3,160 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3.7 mm4,740 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa tray SVG files

← Santa tray plate for carrots All 8 Santa trays Santa tray plate for snacks →