Free Santa tray SVG

Santa tray coaster for milk SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa tray coaster for milk, as a solid black shape — Santa tray coaster for milk. The preview is the SVG file itself.

The spot for the glass: a ring with “Milk for Santa” in script, three stars and a small tumbler of milk. Cut it about 100 mm across for a coaster, or to match the cookie plate.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	10 separate pieces
Outlines to cut	22: 10 outer edges and 12 cut-outs
Cut length	1,287 mm at this size
Narrowest part	1.4 mm at this size
Nodes	410 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.36 mm	327 mm	100	Too fine for most machines
2 × 2 in (51 × 51 mm)	0.71 mm	654 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)	1.1 mm	981 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	1.4 mm	1,308 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	2.1 mm	1,961 mm	1	Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)	2.8 mm	2,615 mm	1	Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)	4.3 mm	3,923 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa tray SVG files

← Santa tray plate for cookies All 8 Santa trays Santa tray plate for carrots →