Free robot SVG

Three robots in a row SVG

Three robots in a row, as a solid black shape — Three robots in a row. The preview is the SVG file itself.

Three different robots standing together on a strip of floor: the boxy toy robot, the round one on tracks and a one-eyed robot on a single wheel. They touch claws, so the row is one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 56 mm (3.94 × 2.19 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	32: 1 outer edge and 31 cut-outs
Cut length	1,241 mm at this size
Narrowest part	1 mm at this size
Nodes	355 curve and line segments

Measured from the file. PNG: 2,000 × 1,144 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.56 in (25 × 14 mm)	0.25 mm	315 mm	160	Too fine for most machines
2 × 1.11 in (51 × 28 mm)	0.51 mm	630 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.67 in (76 × 42 mm)	0.76 mm	946 mm	18	Fine detail: vinyl and paper only, weed with care
4 × 2.22 in (102 × 56 mm)	1 mm	1,261 mm	10	Vinyl, card and thin sheet
6 × 3.33 in (152 × 85 mm)	1.5 mm	1,891 mm	3	Vinyl, card and thin sheet
8 × 4.44 in (203 × 113 mm)	2 mm	2,522 mm	2	Vinyl, card and thin sheet
12 × 6.66 in (305 × 169 mm)	3 mm	3,783 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More robot SVG files

← Robot arm All 14 robots Robotics badge with a gear →