Robot holding a blank sign SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A robot peering over a big empty board that it holds in both claws, with only its feet showing below. Put a name, an age or a message on the board.
What is in the file
| Size | 76 × 100 mm (3.01 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 802 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 134 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,546 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.76 × 1 in (19 × 25 mm) | 0.46 mm | 204 mm | 120 | Too fine for most machines |
| 1.53 × 2 in (39 × 51 mm) | 0.91 mm | 407 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.29 × 3 in (58 × 76 mm) | 1.4 mm | 611 mm | 12 | Vinyl, card and thin sheet |
| 3.06 × 4 in (78 × 102 mm) | 1.8 mm | 815 mm | 6 | Vinyl, card and thin sheet |
| 4.58 × 6 in (116 × 152 mm) | 2.7 mm | 1,222 mm | 2 | Vinyl, card and thin sheet |
| 6.11 × 8 in (155 × 203 mm) | 3.7 mm | 1,630 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.17 × 12 in (233 × 305 mm) | 5.5 mm | 2,444 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.