Robot head SVG
A robot’s head close up: a wide face with two big round eyes, a mouth of four slots, a bolt in each corner, ears, a neck and an antenna with a ball on top.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.65 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 698 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 119 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,858 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 0.76 mm | 177 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.85 in (51 × 47 mm) | 1.5 mm | 355 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.78 in (76 × 71 mm) | 2.3 mm | 532 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.7 in (102 × 94 mm) | 3 mm | 709 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.56 in (152 × 141 mm) | 4.6 mm | 1,064 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.41 in (203 × 188 mm) | 6.1 mm | 1,418 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.11 in (305 × 282 mm) | 9.1 mm | 2,128 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Robot face 
Simple robot icon 
Cartoon robot waving 
Robot with a heart 
Robot arm 
Three robots in a row 
Robotics badge with a gear 
Robot outline 