Free robot SVG

Robot outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Robot outline, drawn as a line
Robot outline. The preview is the SVG file itself.

The toy robot as a line drawing, with round hands, goggles for eyes, a line for a mouth and a screen on its chest, all joined to the outline. For colouring pages, foil and pen plotters.

What is in the file

Size74 × 100 mm (2.91 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,553 mm at this size
Narrowest part1.3 mm at this size
Nodes311 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,498 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.74 × 1 in (19 × 25 mm)0.33 mm394 mm120Too fine for most machines
1.48 × 2 in (38 × 51 mm)0.66 mm789 mm35Fine detail: vinyl and paper only, weed with care
2.22 × 3 in (56 × 76 mm)0.99 mm1,183 mm15Fine detail: vinyl and paper only, weed with care
2.96 × 4 in (75 × 102 mm)1.3 mm1,578 mm6Vinyl, card and thin sheet
4.43 × 6 in (113 × 152 mm)2 mm2,367 mm2Vinyl, card and thin sheet
5.91 × 8 in (150 × 203 mm)2.6 mm3,156 mm1Vinyl, card and thin sheet
8.87 × 12 in (225 × 305 mm)4 mm4,734 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More robot SVG files

← Robotics badge with a gear All 14 robots Robot on one wheel →