Robotics badge with a gear SVG
A robot’s head inside a ring of gear teeth, joined to the ring by its antenna above and its neck below. An emblem for a robotics club, a team shirt or a competition pit sign.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 971 mm at this size |
| Narrowest part | 4.5 mm at this size |
| Nodes | 154 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 1.1 mm | 247 mm | 100 | Vinyl, card and thin sheet |
| 2 × 2 in (51 × 51 mm) | 2.3 mm | 493 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 3.4 mm | 740 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 4 in (102 × 102 mm) | 4.6 mm | 987 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | 6.9 mm | 1,480 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 9.1 mm | 1,973 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 14 mm | 2,960 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Robot outline 
Robot on one wheel 
Robot dog 
Robot holding a blank sign 
Layered robot in four colours 
Toy robot 
Robot head 
Robot face 