Robot on one wheel SVG
A one-eyed robot balancing on a single spoked wheel, with two little antennae, a round body with two vents and a claw held out on each side.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 69 × 100 mm (2.71 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 693 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 130 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,402 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.69 × 1 in (18 × 25 mm) | 0.46 mm | 176 mm | 130 | Too fine for most machines |
| 1.38 × 2 in (35 × 51 mm) | 0.91 mm | 352 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.07 × 3 in (53 × 76 mm) | 1.4 mm | 528 mm | 15 | Vinyl, card and thin sheet |
| 2.76 × 4 in (70 × 102 mm) | 1.8 mm | 704 mm | 8 | Vinyl, card and thin sheet |
| 4.13 × 6 in (105 × 152 mm) | 2.7 mm | 1,056 mm | 2 | Vinyl, card and thin sheet |
| 5.51 × 8 in (140 × 203 mm) | 3.7 mm | 1,408 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.27 × 12 in (210 × 305 mm) | 5.5 mm | 2,112 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Robot dog 
Robot holding a blank sign 
Layered robot in four colours 
Toy robot 
Robot head 
Robot face 
Simple robot icon 
Cartoon robot waving 