Free ring SVG

Stack of three rings SVG

Stack of three rings, as a solid black shape — Stack of three rings. The preview is the SVG file itself.

Three bands seen at an angle and piled one on top of another, each a little smaller than the one below, welded where they touch. For jewellery box labels and stacking-ring gift tags.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 73 mm (3.94 × 2.85 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	807 mm at this size
Narrowest part	3.5 mm at this size
Nodes	89 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,471 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 18 mm)	0.89 mm	205 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.45 in (51 × 37 mm)	1.8 mm	410 mm	35	Vinyl, card and thin sheet
3 × 2.17 in (76 × 55 mm)	2.7 mm	615 mm	15	Vinyl, card and thin sheet
4 × 2.9 in (102 × 74 mm)	3.6 mm	820 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.35 in (152 × 110 mm)	5.3 mm	1,230 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.8 in (203 × 147 mm)	7.1 mm	1,640 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.7 in (305 × 221 mm)	11 mm	2,460 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ring SVG files

← Engagement ring in a box All 14 rings Layered diamond ring with sparkles →