Free ring SVG

Diamond ring outline SVG

Diamond ring outline, drawn as a line — Diamond ring outline. The preview is the SVG file itself.

A ring with one stone as a line drawing about 2.7 mm wide: the band as two circles and the stone with every facet line drawn in, all joined. For colouring and engraving.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	73 × 100 mm (2.89 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	1,068 mm at this size
Narrowest part	3.6 mm at this size
Nodes	84 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,488 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.73 × 1 in (19 × 25 mm)	0.91 mm	271 mm	130	Fine detail: vinyl and paper only, weed with care
1.47 × 2 in (37 × 51 mm)	1.8 mm	543 mm	35	Vinyl, card and thin sheet
2.2 × 3 in (56 × 76 mm)	2.7 mm	814 mm	15	Vinyl, card and thin sheet
2.94 × 4 in (75 × 102 mm)	3.7 mm	1,085 mm	6	Any material, including 3 mm wood and acrylic
4.4 × 6 in (112 × 152 mm)	5.5 mm	1,628 mm	2	Any material, including 3 mm wood and acrylic
5.87 × 8 in (149 × 203 mm)	7.3 mm	2,170 mm	2	Any material, including 3 mm wood and acrylic
8.81 × 12 in (224 × 305 mm)	11 mm	3,255 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ring SVG files

← Ring silhouette All 14 rings Wedding ring band →