Free ring SVG

Wedding rings, his and hers SVG

Wedding rings, his and hers, as a solid black shape
Wedding rings, his and hers. The preview is the SVG file itself.

A plain band and a ring with a stone, linked together with the stone uppermost. A slim gap shows where each band passes under the other, so they cut as two pieces by design.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 93 mm (3.94 × 3.66 in), scales to any size
Pieces2 separate pieces
Outlines to cut7: 2 outer edges and 5 cut-outs
Cut length842 mm at this size
Narrowest part2.8 mm at this size
Nodes141 curve and line segments

Measured from the file. PNG: 2,000 × 1,865 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.71 mm214 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.86 in (51 × 47 mm)1.4 mm428 mm25Vinyl, card and thin sheet
3 × 2.79 in (76 × 71 mm)2.1 mm642 mm12Vinyl, card and thin sheet
4 × 3.72 in (102 × 94 mm)2.8 mm855 mm6Vinyl, card and thin sheet
6 × 5.58 in (152 × 142 mm)4.3 mm1,283 mm2Any material, including 3 mm wood and acrylic
8 × 7.44 in (203 × 189 mm)5.7 mm1,711 mm1Any material, including 3 mm wood and acrylic
12 × 11.16 in (305 × 283 mm)8.5 mm2,566 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ring SVG files

← Interlocking wedding rings All 14 rings Ring monogram frame →