Free ring SVG

Layered diamond ring with sparkles SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Layered diamond ring with sparkles, in layered colours
Layered diamond ring with sparkles. The preview is the SVG file itself.

Three layers to stack: a gold band and setting tipped to one side, a pale blue stone, and four sparkles around it. Swap the gold for silver or rose gold.

What is in the file

Size76 × 100 mm (3.01 × 3.94 in), scales to any size
Pieces6 separate pieces
Outlines to cut10: 6 outer edges and 4 cut-outs
Cut length707 mm at this size
Narrowest part5.7 mm at this size
Nodes80 curve and line segments
Layers3: band, stone and sparkles

Measured from the file. PNG: 1,546 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.76 × 1 in (19 × 25 mm)1.4 mm180 mm120Vinyl, card and thin sheet
1.53 × 2 in (39 × 51 mm)2.9 mm359 mm35Vinyl, card and thin sheet
2.29 × 3 in (58 × 76 mm)4.3 mm539 mm12Any material, including 3 mm wood and acrylic
3.06 × 4 in (78 × 102 mm)5.8 mm718 mm6Any material, including 3 mm wood and acrylic
4.58 × 6 in (116 × 152 mm)8.7 mm1,077 mm2Any material, including 3 mm wood and acrylic
6.11 × 8 in (155 × 203 mm)12 mm1,437 mm1Any material, including 3 mm wood and acrylic
9.17 × 12 in (233 × 305 mm)17 mm2,155 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ring SVG files

← Stack of three rings All 14 rings Engagement ring with a solitaire →