Free ring SVG

Engagement ring with a solitaire SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Engagement ring with a solitaire, as a solid black shape
Engagement ring with a solitaire. The preview is the SVG file itself.

A band seen face on with one cut stone held on top by two claws. The stone is shown from the side, with a flat table on top, and its girdle and two facets cut as fine slots. One piece.

What is in the file

Size76 × 100 mm (2.98 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length627 mm at this size
Narrowest part2.5 mm at this size
Nodes43 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,535 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.76 × 1 in (19 × 25 mm)0.64 mm159 mm120Fine detail: vinyl and paper only, weed with care
1.52 × 2 in (39 × 51 mm)1.3 mm319 mm35Vinyl, card and thin sheet
2.27 × 3 in (58 × 76 mm)1.9 mm478 mm12Vinyl, card and thin sheet
3.03 × 4 in (77 × 102 mm)2.5 mm637 mm6Vinyl, card and thin sheet
4.55 × 6 in (116 × 152 mm)3.8 mm956 mm2Any material, including 3 mm wood and acrylic
6.06 × 8 in (154 × 203 mm)5.1 mm1,274 mm1Any material, including 3 mm wood and acrylic
9.1 × 12 in (231 × 305 mm)7.6 mm1,911 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ring SVG files

← Layered diamond ring with sparkles All 14 rings Ring silhouette →