Free ring SVG

Wedding ring band SVG

Wedding ring band, as a solid black shape — Wedding ring band. The preview is the SVG file itself.

A plain wedding band seen at an angle, so it shows as an oval that is broad at the front and slim at the back, with two short marks of shine cut into the front. For anniversary cards and ring bearer signs.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.6 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	530 mm at this size
Narrowest part	4.9 mm at this size
Nodes	52 curve and line segments

Measured from the file. PNG: 2,000 × 1,346 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	1.2 mm	135 mm	140	Vinyl, card and thin sheet
2 × 1.32 in (51 × 34 mm)	2.5 mm	269 mm	40	Vinyl, card and thin sheet
3 × 1.98 in (76 × 50 mm)	3.7 mm	404 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.64 in (102 × 67 mm)	5 mm	538 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.96 in (152 × 101 mm)	7.5 mm	808 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.28 in (203 × 134 mm)	10 mm	1,077 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.92 in (305 × 201 mm)	15 mm	1,615 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ring SVG files

← Diamond ring outline All 14 rings Interlocking wedding rings →