Free pirate SVG

Pirate skull with a hat and crossed swords SVG

Pirate skull with a hat and crossed swords, as a solid black shape — Pirate skull with a hat and crossed swords. The preview is the SVG file itself.

A skull with a patch over one eye and a three-cornered hat with a braided brim, in front of two crossed cutlasses. The blades show at the cheeks and the hilts below the jaw.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 63 mm (3.94 × 2.46 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	757 mm at this size
Narrowest part	1.9 mm at this size
Nodes	132 curve and line segments

Measured from the file. PNG: 2,000 × 1,279 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.63 in (25 × 16 mm)	0.48 mm	192 mm	140	Too fine for most machines
2 × 1.25 in (51 × 32 mm)	0.97 mm	385 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.87 in (76 × 48 mm)	1.4 mm	577 mm	15	Vinyl, card and thin sheet
4 × 2.5 in (102 × 64 mm)	1.9 mm	769 mm	8	Vinyl, card and thin sheet
6 × 3.75 in (152 × 95 mm)	2.9 mm	1,154 mm	3	Vinyl, card and thin sheet
8 × 5 in (203 × 127 mm)	3.9 mm	1,538 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.5 in (305 × 190 mm)	5.8 mm	2,307 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pirate SVG files

← Layered pirate skull in four colours All 15 pirates Pirate ship under full sail →