Free pirate SVG

Pirate ship silhouette SVG

Pirate ship silhouette, as a solid black shape
Pirate ship silhouette. The preview is the SVG file itself.

The ship as one solid shape on a flat keel line, with nothing cut out of it: hull, bowsprit, three masts, five sails and two pennants. It stands level on the horizon of a sea scene.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 81 mm (3.94 × 3.19 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length724 mm at this size
Narrowest part2.5 mm at this size
Nodes76 curve and line segments

Measured from the file. PNG: 2,000 × 1,635 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.81 in (25 × 21 mm)0.64 mm184 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.62 in (51 × 41 mm)1.3 mm368 mm30Vinyl, card and thin sheet
3 × 2.43 in (76 × 62 mm)1.9 mm552 mm12Vinyl, card and thin sheet
4 × 3.24 in (102 × 82 mm)2.5 mm736 mm6Vinyl, card and thin sheet
6 × 4.86 in (152 × 123 mm)3.8 mm1,103 mm2Any material, including 3 mm wood and acrylic
8 × 6.48 in (203 × 165 mm)5.1 mm1,471 mm1Any material, including 3 mm wood and acrylic
12 × 9.72 in (305 × 247 mm)7.6 mm2,207 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pirate SVG files

← Pirate ship under full sail All 15 pirates Pirate hat with skull and crossbones →