Free pirate SVG

Pirate hat with skull and crossbones SVG

Pirate hat with skull and crossbones, as a solid black shape — Pirate hat with skull and crossbones. The preview is the SVG file itself.

A three-cornered captain’s hat from the front, with a braided brim, a feather curling off one side and a small skull over crossed bones cut from the middle.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 38 mm (3.94 × 1.5 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	504 mm at this size
Narrowest part	1.8 mm at this size
Nodes	70 curve and line segments

Measured from the file. PNG: 2,000 × 808 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.38 in (25 × 10 mm)	0.46 mm	128 mm	210	Too fine for most machines
2 × 0.76 in (51 × 19 mm)	0.91 mm	256 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.14 in (76 × 29 mm)	1.4 mm	384 mm	27	Vinyl, card and thin sheet
4 × 1.52 in (102 × 39 mm)	1.8 mm	512 mm	14	Vinyl, card and thin sheet
6 × 2.28 in (152 × 58 mm)	2.7 mm	768 mm	4	Vinyl, card and thin sheet
8 × 3.04 in (203 × 77 mm)	3.7 mm	1,024 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.56 in (305 × 116 mm)	5.5 mm	1,536 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pirate SVG files

← Pirate ship silhouette All 15 pirates Pirate sword →