Free pirate SVG

Treasure island with a pirate chest SVG

Treasure island with a pirate chest, as a solid black shape — Treasure island with a pirate chest. The preview is the SVG file itself.

A hump of sand with two palm trees and a strapped chest half out of the ground, ringed by waves. A flat-bottomed little scene for a party sign or a pirate bedroom door.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 82 mm (3.94 × 3.24 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	754 mm at this size
Narrowest part	1.6 mm at this size
Nodes	141 curve and line segments

Measured from the file. PNG: 2,000 × 1,660 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.41 mm	192 mm	110	Too fine for most machines
2 × 1.65 in (51 × 42 mm)	0.81 mm	383 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.47 in (76 × 63 mm)	1.2 mm	575 mm	12	Vinyl, card and thin sheet
4 × 3.29 in (102 × 84 mm)	1.6 mm	766 mm	6	Vinyl, card and thin sheet
6 × 4.94 in (152 × 125 mm)	2.4 mm	1,149 mm	2	Vinyl, card and thin sheet
8 × 6.58 in (203 × 167 mm)	3.3 mm	1,532 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.88 in (305 × 251 mm)	4.9 mm	2,298 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pirate SVG files

← Pirate treasure map All 15 pirates Pirate hook →