Free pirate SVG

Pirate parrot on a swing SVG

Pirate parrot on a swing, as a solid black shape
Pirate parrot on a swing. The preview is the SVG file itself.

A parrot perched on a swing: a hooked beak, a round eye, two wing lines and a tail of three long feathers hanging below the bar. The swing’s cords and ring hold it all together.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size62 × 100 mm (2.43 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length793 mm at this size
Narrowest part2.2 mm at this size
Nodes98 curve and line segments

Measured from the file. PNG: 1,262 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.62 × 1 in (16 × 25 mm)0.56 mm201 mm140Fine detail: vinyl and paper only, weed with care
1.23 × 2 in (31 × 51 mm)1.1 mm403 mm40Vinyl, card and thin sheet
1.85 × 3 in (47 × 76 mm)1.7 mm604 mm15Vinyl, card and thin sheet
2.46 × 4 in (63 × 102 mm)2.2 mm806 mm8Vinyl, card and thin sheet
3.7 × 6 in (94 × 152 mm)3.4 mm1,209 mm3Any material, including 3 mm wood and acrylic
4.93 × 8 in (125 × 203 mm)4.5 mm1,611 mm2Any material, including 3 mm wood and acrylic
7.39 × 12 in (188 × 305 mm)6.7 mm2,417 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pirate SVG files

← Girl pirate skull with a bow All 15 pirates Pirate monogram frame with crossed swords →