Layered pirate skull in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Four layers to stack: two steel-grey cutlasses, a bone-white skull, a red bandana with a knot at one side, and black for the eye, the nose, the patch and the teeth.
What is in the file
| Size | 100 × 76 mm (3.94 × 3 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 16: 9 outer edges and 7 cut-outs |
| Cut length | 1,409 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 197 curve and line segments |
| Layers | 4: swords, skull, bandana and black |
Measured from the file. PNG: 2,000 × 1,542 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.76 in (25 × 19 mm) | 0.41 mm | 358 mm | 120 | Too fine for most machines |
| 2 × 1.52 in (51 × 39 mm) | 0.81 mm | 716 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.29 in (76 × 58 mm) | 1.2 mm | 1,074 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.05 in (102 × 77 mm) | 1.6 mm | 1,432 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.57 in (152 × 116 mm) | 2.4 mm | 2,147 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.1 in (203 × 155 mm) | 3.3 mm | 2,863 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.14 in (305 × 232 mm) | 4.9 mm | 4,295 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More pirate SVG files
-
Pirate skull with a hat and crossed swords Solid · one piece
-
Pirate ship under full sail Solid · one piece
-
Pirate ship silhouette Solid · one piece
-
Pirate hat with skull and crossbones Solid · one piece
-
Pirate sword Solid · one piece
-
Pirate treasure chest Solid · one piece
-
Pirate treasure map Solid · one piece
-
Treasure island with a pirate chest Solid · one piece
← Pirate monogram frame with crossed swords All 15 pirates Pirate skull with a hat and crossed swords →