Free pirate SVG

Pirate treasure map SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pirate treasure map, as a solid black shape
Pirate treasure map. The preview is the SVG file itself.

A scroll with a ragged edge and a roll at top and bottom: a dotted trail winds past a palm tree and two peaks to a cross, with a four-pointed compass star in the corner. No lettering.

What is in the file

Size100 × 84 mm (3.94 × 3.32 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length753 mm at this size
Narrowest part3.7 mm at this size
Nodes115 curve and line segments

Measured from the file. PNG: 2,000 × 1,700 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.94 mm191 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.69 in (51 × 43 mm)1.9 mm383 mm30Vinyl, card and thin sheet
3 × 2.53 in (76 × 64 mm)2.8 mm574 mm12Vinyl, card and thin sheet
4 × 3.38 in (102 × 86 mm)3.8 mm765 mm6Any material, including 3 mm wood and acrylic
6 × 5.06 in (152 × 129 mm)5.6 mm1,148 mm2Any material, including 3 mm wood and acrylic
8 × 6.75 in (203 × 172 mm)7.5 mm1,530 mm1Any material, including 3 mm wood and acrylic
12 × 10.13 in (305 × 257 mm)11 mm2,295 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pirate SVG files

← Pirate treasure chest All 15 pirates Treasure island with a pirate chest →