Free pirate SVG

Pirate head with a bandana and beard SVG

Pirate head with a bandana and beard, as a solid black shape
Pirate head with a bandana and beard. The preview is the SVG file itself.

A pirate’s head from the front: a spotted bandana knotted at one side, a patch over one eye, a moustache, a full beard and a hoop earring. A generic storybook pirate, not a character.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length802 mm at this size
Narrowest part5 mm at this size
Nodes119 curve and line segments

Measured from the file. PNG: 1,994 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)1.3 mm204 mm100Vinyl, card and thin sheet
1.99 × 2 in (51 × 51 mm)2.5 mm407 mm25Vinyl, card and thin sheet
2.99 × 3 in (76 × 76 mm)3.8 mm611 mm9Any material, including 3 mm wood and acrylic
3.99 × 4 in (101 × 102 mm)5.1 mm815 mm4Any material, including 3 mm wood and acrylic
5.98 × 6 in (152 × 152 mm)7.6 mm1,222 mm1Any material, including 3 mm wood and acrylic
7.98 × 8 in (203 × 203 mm)10 mm1,630 mm1Any material, including 3 mm wood and acrylic
11.96 × 12 in (304 × 305 mm)15 mm2,444 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pirate SVG files

← Pirate eye patch All 15 pirates Girl pirate skull with a bow →