Free pirate SVG

Pirate sword SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pirate sword, as a solid black shape
Pirate sword. The preview is the SVG file itself.

A cutlass on a slant: a short curved blade that widens towards the point, a groove down its length, a crossguard with a knuckle bow, a grip and a round pommel.

What is in the file

Size92 × 100 mm (3.61 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length502 mm at this size
Narrowest part1.9 mm at this size
Nodes55 curve and line segments

Measured from the file. PNG: 1,842 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.48 mm128 mm100Too fine for most machines
1.84 × 2 in (47 × 51 mm)0.97 mm255 mm25Fine detail: vinyl and paper only, weed with care
2.75 × 3 in (70 × 76 mm)1.4 mm383 mm12Vinyl, card and thin sheet
3.67 × 4 in (93 × 102 mm)1.9 mm510 mm6Vinyl, card and thin sheet
5.51 × 6 in (140 × 152 mm)2.9 mm765 mm2Vinyl, card and thin sheet
7.34 × 8 in (187 × 203 mm)3.9 mm1,020 mm1Any material, including 3 mm wood and acrylic
11.02 × 12 in (280 × 305 mm)5.8 mm1,530 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pirate SVG files

← Pirate hat with skull and crossbones All 15 pirates Pirate treasure chest →