Open in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Open” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.6 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 6: 4 outer edges and 2 cut-outs |
| Cut length | 975 mm at this size |
| Narrowest part | 3.6 mm at this size |
| Nodes | 184 curve and line segments |
Measured from the file. PNG: 2,000 × 1,346 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.91 mm | 248 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.32 in (51 × 34 mm) | 1.8 mm | 495 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.98 in (76 × 50 mm) | 2.7 mm | 743 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.64 in (102 × 67 mm) | 3.7 mm | 991 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.96 in (152 × 101 mm) | 5.5 mm | 1,486 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.28 in (203 × 134 mm) | 7.3 mm | 1,981 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.92 in (305 × 201 mm) | 11 mm | 2,972 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Open SVG files
-
Open in block capitals Solid · 4 pieces
-
Open with a swash underline Solid · 3 pieces
-
Open with stars Solid · 9 pieces
-
Open outline lettering Outline · 7 pieces
-
Open stencil plate Solid · one piece
-
Open with a drop shadow Layered · 4 pieces
-
Open with a little house Solid · 4 pieces
-
Open in Pacifico Solid · 2 pieces
← Open in Alfa Slab One All 13 Open designs Open in block capitals →