Free Open SVG

Open with stars SVG

Open with stars, as a solid black shape — Open with stars. The preview is the SVG file itself.

“Open” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 81 mm (3.94 × 3.19 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	11: 9 outer edges and 2 cut-outs
Cut length	876 mm at this size
Narrowest part	2 mm at this size
Nodes	206 curve and line segments

Measured from the file. PNG: 2,000 × 1,635 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.81 in (25 × 21 mm)	0.51 mm	223 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.62 in (51 × 41 mm)	1 mm	445 mm	30	Vinyl, card and thin sheet
3 × 2.43 in (76 × 62 mm)	1.5 mm	668 mm	12	Vinyl, card and thin sheet
4 × 3.24 in (102 × 82 mm)	2 mm	890 mm	6	Vinyl, card and thin sheet
6 × 4.86 in (152 × 123 mm)	3 mm	1,335 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.48 in (203 × 165 mm)	4.1 mm	1,780 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.72 in (305 × 247 mm)	6.1 mm	2,670 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Open SVG files

← Open with a swash underline All 12 Open designs Open outline lettering →