Open with a swash underline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Open” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.63 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 7: 3 outer edges and 4 cut-outs |
| Cut length | 775 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 170 curve and line segments |
Measured from the file. PNG: 2,000 × 1,360 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.74 mm | 197 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.33 in (51 × 34 mm) | 1.5 mm | 394 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2 in (76 × 51 mm) | 2.2 mm | 591 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.67 in (102 × 68 mm) | 2.9 mm | 787 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4 in (152 × 102 mm) | 4.4 mm | 1,181 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.34 in (203 × 136 mm) | 5.9 mm | 1,575 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8 in (305 × 203 mm) | 8.8 mm | 2,362 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Open SVG files
-
Open with stars Solid · 9 pieces
-
Open outline lettering Outline · 7 pieces
-
Open stencil plate Solid · one piece
-
Open with a drop shadow Layered · 4 pieces
-
Open with a little house Solid · 4 pieces
-
Open in Pacifico Solid · 2 pieces
-
Open in Lobster Solid · 3 pieces
-
Open in Kaushan Script Solid · 4 pieces
← Open in block capitals All 13 Open designs Open with stars →