Free Open SVG

Open in block capitals SVG

Open in block capitals, as a solid black shape — Open in block capitals. The preview is the SVG file itself.

“OPEN” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 48 mm (3.94 × 1.89 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	6: 4 outer edges and 2 cut-outs
Cut length	796 mm at this size
Narrowest part	5.6 mm at this size
Nodes	64 curve and line segments

Measured from the file. PNG: 2,000 × 998 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.48 in (25 × 12 mm)	1.4 mm	202 mm	170	Vinyl, card and thin sheet
2 × 0.96 in (51 × 24 mm)	2.8 mm	404 mm	50	Vinyl, card and thin sheet
3 × 1.44 in (76 × 36 mm)	4.3 mm	607 mm	21	Any material, including 3 mm wood and acrylic
4 × 1.92 in (102 × 49 mm)	5.7 mm	809 mm	10	Any material, including 3 mm wood and acrylic
6 × 2.87 in (152 × 73 mm)	8.5 mm	1,213 mm	3	Any material, including 3 mm wood and acrylic
8 × 3.83 in (203 × 97 mm)	11 mm	1,617 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.75 in (305 × 146 mm)	17 mm	2,426 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Open SVG files

← Open in Amatic SC All 12 Open designs Open with a swash underline →