Free Open SVG

Open stencil plate SVG

Open stencil plate, as a solid black shape — Open stencil plate. The preview is the SVG file itself.

A rounded plate with “OPEN” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 50 mm (3.94 × 1.97 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	871 mm at this size
Narrowest part	1.7 mm at this size
Nodes	67 curve and line segments

Measured from the file. PNG: 2,000 × 1,040 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.5 in (25 × 13 mm)	0.43 mm	221 mm	170	Too fine for most machines
2 × 1 in (51 × 25 mm)	0.86 mm	442 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.5 in (76 × 38 mm)	1.3 mm	664 mm	21	Vinyl, card and thin sheet
4 × 2 in (102 × 51 mm)	1.7 mm	885 mm	10	Vinyl, card and thin sheet
6 × 3.01 in (152 × 76 mm)	2.6 mm	1,327 mm	3	Vinyl, card and thin sheet
8 × 4.01 in (203 × 102 mm)	3.5 mm	1,770 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.01 in (305 × 153 mm)	5.2 mm	2,655 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Open SVG files

← Open outline lettering All 12 Open designs Open with a drop shadow →