Open in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Open” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.59 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 7: 4 outer edges and 3 cut-outs |
| Cut length | 477 mm at this size |
| Narrowest part | 5 mm at this size |
| Nodes | 91 curve and line segments |
Measured from the file. PNG: 2,000 × 856 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 1.3 mm | 121 mm | 200 | Vinyl, card and thin sheet |
| 2 × 0.81 in (51 × 21 mm) | 2.5 mm | 242 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.21 in (76 × 31 mm) | 3.8 mm | 363 mm | 24 | Any material, including 3 mm wood and acrylic |
| 4 × 1.62 in (102 × 41 mm) | 5.1 mm | 485 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.43 in (152 × 62 mm) | 7.6 mm | 727 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.24 in (203 × 82 mm) | 10 mm | 969 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.86 in (305 × 123 mm) | 15 mm | 1,454 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Open SVG files
-
Open in Alfa Slab One Solid · 4 pieces
-
Open in Amatic SC Solid · 4 pieces
-
Open in block capitals Solid · 4 pieces
-
Open with a swash underline Solid · 3 pieces
-
Open with stars Solid · 9 pieces
-
Open outline lettering Outline · 7 pieces
-
Open stencil plate Solid · one piece
-
Open with a drop shadow Layered · 4 pieces
← Open in Kaushan Script All 13 Open designs Open in Alfa Slab One →