Free Open SVG

Open outline lettering SVG

Open outline lettering, drawn as a line — Open outline lettering. The preview is the SVG file itself.

“Open” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 38 mm (3.94 × 1.51 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	14: 7 outer edges and 7 cut-outs
Cut length	891 mm at this size
Narrowest part	1.4 mm at this size
Nodes	186 curve and line segments

Measured from the file. PNG: 2,000 × 815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.38 in (25 × 10 mm)	0.36 mm	226 mm	200	Too fine for most machines
2 × 0.77 in (51 × 20 mm)	0.71 mm	453 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.15 in (76 × 29 mm)	1.1 mm	679 mm	27	Vinyl, card and thin sheet
4 × 1.54 in (102 × 39 mm)	1.4 mm	905 mm	14	Vinyl, card and thin sheet
6 × 2.3 in (152 × 59 mm)	2.1 mm	1,358 mm	4	Vinyl, card and thin sheet
8 × 3.07 in (203 × 78 mm)	2.8 mm	1,811 mm	3	Vinyl, card and thin sheet
12 × 4.61 in (305 × 117 mm)	4.3 mm	2,716 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Open SVG files

← Open with stars All 12 Open designs Open stencil plate →