Free Open SVG

Open in Pacifico SVG

Open in Pacifico, as a solid black shape — Open in Pacifico. The preview is the SVG file itself.

“Open” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 58 mm (3.94 × 2.28 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	6: 2 outer edges and 4 cut-outs
Cut length	598 mm at this size
Narrowest part	3.2 mm at this size
Nodes	158 curve and line segments

Measured from the file. PNG: 2,000 × 1,192 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.58 in (25 × 15 mm)	0.81 mm	152 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.16 in (51 × 29 mm)	1.6 mm	304 mm	40	Vinyl, card and thin sheet
3 × 1.74 in (76 × 44 mm)	2.4 mm	456 mm	18	Vinyl, card and thin sheet
4 × 2.32 in (102 × 59 mm)	3.3 mm	608 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.48 in (152 × 88 mm)	4.9 mm	911 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.64 in (203 × 118 mm)	6.5 mm	1,215 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.96 in (305 × 177 mm)	9.8 mm	1,823 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Open SVG files

← Open with a drop shadow All 12 Open designs Open in Lobster →