Free mustache SVG

Full beard with a mustache SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Full beard with a mustache, as a solid black shape
Full beard with a mustache. The preview is the SVG file itself.

A full beard without a face: sideburns, cheeks and chin, a moustache line under the nose and an opening for the mouth, with a few strands cut in to show how the hair falls.

What is in the file

Size100 × 100 mm (3.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,030 mm at this size
Narrowest part3.4 mm at this size
Nodes214 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,994 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.86 mm262 mm100Fine detail: vinyl and paper only, weed with care
1.99 × 2 in (51 × 51 mm)1.7 mm523 mm25Vinyl, card and thin sheet
2.99 × 3 in (76 × 76 mm)2.6 mm785 mm9Vinyl, card and thin sheet
3.99 × 4 in (101 × 102 mm)3.5 mm1,046 mm4Any material, including 3 mm wood and acrylic
5.98 × 6 in (152 × 152 mm)5.2 mm1,570 mm1Any material, including 3 mm wood and acrylic
7.98 × 8 in (203 × 203 mm)6.9 mm2,093 mm1Any material, including 3 mm wood and acrylic
11.96 × 12 in (304 × 305 mm)10 mm3,139 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mustache SVG files

← Mustache outline All 18 mustaches Long beard and mustache silhouette →