Free mustache SVG

Layered beard with a handlebar mustache SVG

Layered beard with a handlebar mustache, in layered colours
Layered beard with a handlebar mustache. The preview is the SVG file itself.

Two layers: a long brown beard with an opening for the mouth, and a darker handlebar moustache to lay over the top of it, wider than the beard itself.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 89 mm (3.94 × 3.52 in), scales to any size
Pieces2 separate pieces
Outlines to cut3: 2 outer edges and 1 cut-out
Cut length664 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes93 curve and line segments
SymmetryMirror
Layers2: beard and moustache

Measured from the file. PNG: 2,000 × 1,796 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 23 mm)Over 1.5 mm169 mm110Vinyl, card and thin sheet
2 × 1.79 in (51 × 45 mm)Over 3 mm337 mm30Any material, including 3 mm wood and acrylic
3 × 2.68 in (76 × 68 mm)Over 4.6 mm506 mm12Any material, including 3 mm wood and acrylic
4 × 3.58 in (102 × 91 mm)Over 6.1 mm675 mm6Any material, including 3 mm wood and acrylic
6 × 5.36 in (152 × 136 mm)Over 9.1 mm1,012 mm2Any material, including 3 mm wood and acrylic
8 × 7.15 in (203 × 182 mm)Over 12 mm1,349 mm1Any material, including 3 mm wood and acrylic
12 × 10.73 in (305 × 272 mm)Over 18 mm2,024 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mustache SVG files

← Six mustache styles All 18 mustaches Handlebar mustache →