Free mustache SVG

Top hat, monocle and mustache SVG

Top hat, monocle and mustache, as a solid black shape
Top hat, monocle and mustache. The preview is the SVG file itself.

A gentleman with no face: a top hat with a band, a monocle on a chain and an imperial moustache. Three separate pieces by design, to place over a photo or a pumpkin.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length740 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes96 curve and line segments

Measured from the file. PNG: 1,679 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)Over 1.5 mm188 mm110Vinyl, card and thin sheet
1.67 × 2 in (42 × 51 mm)Over 3 mm376 mm30Any material, including 3 mm wood and acrylic
2.5 × 3 in (63 × 76 mm)Over 4.6 mm564 mm12Any material, including 3 mm wood and acrylic
3.33 × 4 in (85 × 102 mm)Over 6.1 mm752 mm6Any material, including 3 mm wood and acrylic
5 × 6 in (127 × 152 mm)Over 9.1 mm1,128 mm2Any material, including 3 mm wood and acrylic
6.66 × 8 in (169 × 203 mm)Over 12 mm1,504 mm1Any material, including 3 mm wood and acrylic
10 × 12 in (254 × 305 mm)Over 18 mm2,256 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mustache SVG files

← Mustache and bow tie All 18 mustaches Glasses, mustache and beard →