Free mustache SVG

Mustache outline SVG

Mustache outline, drawn as a line
Mustache outline. The preview is the SVG file itself.

The handlebar moustache as a line about 2 mm wide, curls and all, in one piece. For colouring pages, embroidery and pen plotting.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 24 mm (3.94 × 0.93 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length528 mm at this size
Narrowest part1.9 mm at this size
Nodes79 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 529 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.24 in (25 × 6 mm)0.48 mm134 mm280Too fine for most machines
2 × 0.47 in (51 × 12 mm)0.97 mm268 mm90Fine detail: vinyl and paper only, weed with care
3 × 0.7 in (76 × 18 mm)1.4 mm402 mm39Vinyl, card and thin sheet
4 × 0.94 in (102 × 24 mm)1.9 mm536 mm20Vinyl, card and thin sheet
6 × 1.41 in (152 × 36 mm)2.9 mm805 mm7Vinyl, card and thin sheet
8 × 1.88 in (203 × 48 mm)3.9 mm1,073 mm5Any material, including 3 mm wood and acrylic
12 × 2.82 in (305 × 72 mm)5.8 mm1,609 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mustache SVG files

← Horseshoe mustache All 18 mustaches Full beard with a mustache →