Free mustache SVG

Long beard and mustache silhouette SVG

Long beard and mustache silhouette, as a solid black shape
Long beard and mustache silhouette. The preview is the SVG file itself.

A longer, plain beard that runs to a rounded point well below the chin, solid except for the mouth. Hold it under any face, photo or animal to give it a beard.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size76 × 100 mm (3 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length389 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes52 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,540 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.76 × 1 in (19 × 25 mm)Over 1.5 mm99 mm120Vinyl, card and thin sheet
1.52 × 2 in (39 × 51 mm)Over 3 mm198 mm35Any material, including 3 mm wood and acrylic
2.28 × 3 in (58 × 76 mm)Over 4.6 mm296 mm12Any material, including 3 mm wood and acrylic
3.04 × 4 in (77 × 102 mm)Over 6.1 mm395 mm6Any material, including 3 mm wood and acrylic
4.57 × 6 in (116 × 152 mm)Over 9.1 mm593 mm2Any material, including 3 mm wood and acrylic
6.09 × 8 in (155 × 203 mm)Over 12 mm790 mm1Any material, including 3 mm wood and acrylic
9.13 × 12 in (232 × 305 mm)Over 18 mm1,186 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mustache SVG files

← Full beard with a mustache All 18 mustaches Goatee with a mustache →